Articles Choice and Concern

Airtract Supriya Daanish Thakur Take the risk or lose the chance

Coding Vs. Programming – 6 differences 09 July, 2019   

In this technologically driven world where the majority of people are either relying on online resources or are staying glued to the computer for getting most parts of their life sorted, learning about the common technology-based terminology can be quite beneficial, especially if there is a tendency of them being confused for the other. 

Coding Vs. Programming is one of those aspects of controversy that the majority of the people tend to have misconceptions about. Many people, who are not well versed with these, tend to think that both are the same, or at least almost are. But, the truth is slightly misconstrued. Both coding, as well as programming, is a very important part in the field of computer science and technology, but here’s the thing; they are not the same. There is quite a lot of difference between these two which majority of the people tend to not know about. 

In this guide, we are going to be walking ourselves through the common differences between coding vs. Programming that many often tend to confuse. 

What is Coding?

Coding, in simple terms, is nothing but writing codes, translating one computer language to the other, either for program operations or even application and software development. Unlike Programming, coding is not a subject that’s widespread and vast; it is the mere task of the coder to write codes for the various computer programming languages. 

If you didn’t know, a computer needs its form of language to understand the interpretations and the commands its been told to do which is exactly what the coder does. So, the job of the coder is to translate these requirements and commands into language that the machine will be able to perceive easily. Coding is nothing but a set of written instructions that the computer can understand and program. 

What is Programming?

Programming is a wide scheme of things which include the running of programs on the machine or application to ensure that it runs without any errors. This process includes putting in information into the machine for it to perform those set of instructions. It can include codes that are run on the computer to help achieve the kind of outputs that people wish to see. 

A programmer is the one who starts off their initial stage of running a program by writing the codes down following which the steps gradually increase and the outcomes are likely to be aligned to the expectation that the programmer has. Becoming a professional programmer takes years which is why people branch out and work as a developer, coders or even analysts first and then combine the knowledge and experience of all of these aspects to become a successful programmer.

Let us look at the differences now

Now, that we have seen the basic definition between Coding Vs. Programming, it is time that we delve into a comparative analysis of the two to have a fair understanding of why these two aspects are not the same and have quite a lot of different features and approaches to them. 

1. Definition

Coding, as mentioned before, is the programming process of writing codes from one computer language to the other to help facilitate the understanding of these machines which are capable of understanding just the binary codes and nothing else.

Programming, on the other hand, is the extensive process of creating as well as developing a machine program including codes and other information which is then run on the computer or machine to attain the desired output from the same set of instructions.

2. Templating

With the definitions aside, let us look at the aspects of templating.

Coding is primarily used to facilitate the process of communication between the machine and the human. The computer language is translated into the easy ways to help the machine understand the kind of commands that the coder is trying to provide them with. 

Programming is the process in which the written codes are run on the machine to help keep the human inputs as well as the machine outputs in sync with each other. It extensively includes the proper functioning of the inserted commands to provide with suitable results. 

3. Skills and Expertise

The next aspect of comparison between Coding vs. Programming includes that of the involved skills and expertise. 

Because coding is the initial stages of programming, it is likely that the coders don’t have that level of experience to what the programmers do. Coding is a part of the process of programming, but the other needs a wider spectrum of knowledge and experience to finally accredit them as successful programmers. 

Programming takes into account the process of coding, analyzing as well as the development of the instructions, applications or even any kind of operating system. Because this requires such a multifaceted approach to executing the stages, it requires years of experience in the field to be able to become a professional programmer.

4. Complexity

Because coding is the initial stage of programming, even though the whole process is tough, it is not that extensive like that of programming, which is what makes it quite easier than programming. It doesn’t have that much level of complex queries and can be easily solved if there are any. 

Programming, on the other hand, is quite extensive and can arise several queries and complexities throughout the process to produce the perfect machine level output. It is comparatively a lot more complex than coding and requires more experience and expertise. 

5. Advanced features

Coding is just a programming approach whose main and primary focus is to focus around on the various lines of codes and even implementing the same to the machine-readable inputs. Because coding is limited to writing lines of binary language best suited for the computer’s understanding, it is quite possible that there would be little to no changed in how the advanced features are. 

Programming, as mentioned before, is not just stuck to a single realm but works around a wider picture and involves several critical parameters from finding bugs in the inputs and fixing them for better machine outputs. It is responsible for handling the core functionality and for maintaining proper sync between the inputs and the outputs that we get from the machine. It is the reason why these set of advanced features are way more complex than that of the coding. 

6. Attention to detail

Coding is the rough draft to programming. Writing codes and running them to see if they are successful enough is just about the job that a coder performs.

Attention to detail is a very important aspect in the field of programming. A programmer does not just need to analyze and run the code to see if it produces the kind of output that they were looking for, their job also demands them to conceptualize the entire process and even go through with the kind of problems and bugs that the process might be exposed to. Substantial logic is key to the process. 

Now, that we have looked through the majority of the Coding Vs. Programming attributes now are the time to delve into the various aspects of generalizing them into one. Coding is the initial stage of programming, which then goes on to the next stages and the culmination of which is what programming is translated as. Coding and Programming might seem like synonymous terms, but they are quite extensively different from each other, and this article has been written to shed some light on the same fact.

Programming Coding Programming Skills Coding Skills Coding Vs. Programming

Related Articles

6 Last-minute Event Planning Tips for a Busy Host 5 Best Game Programming languages you need to know! How to get better at programming: 7 Expert tips!

Choice and Concern Courses


The Birth of the Railways around Glasgow

Ross Maynard

0 (0) New Course

The history of the early railway lines around Glasgow and how they created the largest railway locomotive and carriage building factories in the world.

44.24 mins 0 Students Enrolled 3 Lectures


-111.11 % off $9


Buy Now

Perspectivas Biblicas

Luis Costa

0 (0) New Course

Numa forma muito sintetizada, este curso visa apenas a dar uma perspectiva de como pode ser lida e interpretada a Bíblia, com algumas das suas passagens, não deturpando, nem usufruindo da imaginaçã...

2 hrs 7.40 mins 0 Students Enrolled 18 Lectures


5.00 % off $20


Buy Now

Land your dream job - Using the 5C framework to ma...

Hans Weemaes

0 (0) New Course

Land your dream Job. You have been working hard to perfect your cv, to write the perfect cover letter.  You heard from friends that landing the perfect job is almost a mission impossible.  You a...

32.21 mins 0 Students Enrolled 12 Lectures


51.28 % off $39


Buy Now



0 (0) New Course

The Swing Beats explored in ULTIMATE DRUMMING's course # 10 are used in all the popular music genres and should be a integral part of every drummers repertoire. The Swing rhythm originated in the ...

1 hrs 1.45 min 0 Students Enrolled 10 Lectures


62.00 % off $50


Buy Now
View All
Item added successfully. Go to cart for checkout.
Accept Reject